dc.contributor.author | Hurley, Alexander | |
dc.date.accessioned | 2015-05-01T12:07:19Z | |
dc.date.available | 2015-05-01T12:07:19Z | |
dc.date.issued | 2015-05-01 | |
dc.identifier.uri | http://hdl.handle.net/10222/56758 | |
dc.description.abstract | In most aquatic environments, suspended sediment is composed of loosely packed particle aggregates, termed flocs, that have variable apparent densities. The apparent density of flocs, which is defined as particle dry mass over wet volume, is an important variable because it affects vertical sediment flux and light scattering per unit mass in the ocean. Two established methods exist for measuring apparent density. One method uses physical measurements of sediment mass combined with measurements of particle volume from optical instruments to estimate apparent density. This method is laborious because it requires the collection of water samples and is not conducive to construction of high resolution time series of density. Another method uses video observations of particles in a settling column to measure particle size and settling velocity. These measurements are used to solve for apparent density according to Stokes Law. The goal of this study is to compare a new method that uses the ratio of particulate beam attenuation to particle volume to estimate apparent density of sediment in suspension. Data from several studies are used to compare density estimates from the different methods. The new optical method produces apparent densities that are correlated linearly with measurements of the ratio of dry mass to wet volume. However, the new optical method produces density estimates that do not correlate with video estimates of apparent density. Lack of correlation is due to sampling bias of the video method, which has a relatively large lower limit of resolution in particle size. Development of a higher resolution camera would eliminate the current bias in particle size and would further validate the new optical method as an accurate proxy for apparent density. | en_US |
dc.language.iso | en | en_US |
dc.subject | Apparent density | en_US |
dc.subject | Optics | en_US |
dc.subject | Sediment density | en_US |
dc.subject | Sediment in suspension | en_US |
dc.title | METHODS FOR ESTIMATING APPARENT DENSITY OF SEDIMENT IN SUSPENSION USING OPTICS | en_US |
dc.date.defence | 2015-04-27 | |
dc.contributor.department | Department of Oceanography | en_US |
dc.contributor.degree | Master of Science | en_US |
dc.contributor.external-examiner | Dr. Emmanuel Boss | en_US |
dc.contributor.graduate-coordinator | Dr. Daniel E. Kelley | en_US |
dc.contributor.thesis-reader | Timothy Milligan | en_US |
dc.contributor.thesis-reader | Dr. Barry Ruddick | en_US |
dc.contributor.thesis-reader | Dr. Stephanie Kienast | en_US |
dc.contributor.thesis-supervisor | Dr. Paul Hill | en_US |
dc.contributor.ethics-approval | Not Applicable | en_US |
dc.contributor.manuscripts | Not Applicable | en_US |
dc.contributor.copyright-release | Not Applicable | en_US |