Browsing Sadeghian, Pedram by Title
Now showing items 24-43 of 85
-
Experimental and analytical investigations of the flexural behavior of hollow ±55° filament wound GFRP tubes
The behavior of ±55° filament wound glass fiber-reinforced polymer (GFRP) tubes under flexural loading was examined experimentally and analytically. A total of 15 tubes were tested under four-point bending. The main test ... -
Experimental Investigation of Short and Slender Rectangular Concrete Columns Reinforced with GFRP Bars under Eccentric Axial Loads
In this paper, the experimental behavior of short and slender concrete columns reinforced with glass fiber-reinforced polymer (GFRP) bars under eccentric compression loading is presented. A total of 10 large-scale concrete ... -
Experimental study of hollow FRP sections under bending
This paper presents an experimental study on hollow, fibre-reinforced polymer (FRP) sections subjected to bending. This study is part of an ongoing project, with the eventual goal being to use the sections as a bridge ... -
Experimental Study of Rectangular RC Columns Strengthened with CFRP Composites under Eccentric Loading
This paper presents the results of experimental studies on reinforced concrete columns strengthened with CFRP composites under combination of axial load and bending moment. A total of seven large-scale specimens with ... -
Experiments and nonlinear analysis of the impact behaviour of sandwich panels constructed with flax fibre-reinforced polymer faces and foam cores
As the effects of climate change become more apparent, it is necessary that environmental impact is considered in every aspect of our society, including the design of new infrastructure. The use of natural materials for ... -
Flexural and shear characteristics of bio-based sandwich beams made of hollow and foam-filled paper honeycomb cores and flax fiber composite skins
In this paper, bio-based sandwich panels made of fiber-reinforced polymer (FRP) skins and two types of paper honeycomb core (namely, hollow and foam-filled) with three different thicknesses (namely, 6 mm, 12 mm, and 25 mm) ... -
Flexural Behavior of Sandwich Panels made of FRP Composites: Synthetic and Natural Fibers
Sandwich panels made of fiber-reinforced polymer (FRP) skins and light-weight core materials have the potential to be effectively used in several structural applications such as cladding, decking, and roofing panels. The ... -
FRP Materials for Rehabilitation of Buried Pipes
Over time, pipes tend to deteriorate due to various physical and chemical parameters. Therefore, they necessitate rehabilitation to improve the service life of structure. Bonding a fiber-reinforced polymer (FRP) liner ... -
Green Sandwich Composites Fabricated from Flax FRP Facings and Corrugated Cardboard Cores
Composite sandwich beams and panels made of fiber-reinforced polymer (FRP) and lightweight, low-density core materials have been shown to be effective in reducing weight and increasing strength and stiffness in a variety ... -
Hybrid FRP Strengthening of Slender Steel Members for Buckling Control
In this paper, the structural properties and behaviour of slender steel members strengthened against buckling by a hybrid system of fibre-reinforced polymer (FRP) shells filled with self-consolidating grout (SCG), in the ... -
Hybrid system of longitudinal CFRP laminates and GFRP wraps for strengthening of existing circular concrete columns
This paper presents an investigation on the behavior of a strengthening system of longitudinal premanufactured carbon fiber-reinforced polymer (CFRP) laminates and transverse glass FRP (GFRP) wrapping for strengthening of ... -
Impact Behavior of Sustainable Sandwich Panels with Flax FRP Faces and Cardboard Cores
Structural sandwich panels have been shown to be effective for use as building cladding materials due to their low weight and high relative strength and stiffness. To increase the sustainability of these panels natural and ... -
Improved Design-Oriented Confinement Models for FRP-Wrapped Concrete Cylinders based on Statistical Analyses
This paper introduces improved design-oriented confinement models for cylindrical concrete members wrapped with fiber reinforced polymer (FRP) composites based on a rigorous statistical evaluation of a large database. As ... -
Investigation of the Stress-Strain Constitutive Behavior of ±55° Filament Wound GFRP Pipes in Compression and Tension
The behavior of hollow ±55o filament wound glass fiber-reinforced polymer (GFRP) pipes under longitudinal compressive and tensile loading is studied experimentally using 31 pipe specimens. The main parameters were the ...