CONTRIBUTIONS TO THE HYDRAULICS OF FLOW-THROUGH ROCKFILL STRUCTURES

Abstract

Non-overflow flow-through rockfill structures are river engineering elements used to attenuate and delay inflow hydrographs. They represent expedient places to deposit rather enormous quantities of waste rock at mountainous mine sites. Their application has become so common that matters of safety regarding their design have been laid out in Section 8.5 of the Canadian Dam Safety Guidelines (CDA 2007). The research described herein was directed at investigating the different aspects of the hydraulics of these flow-through rockfill structures. In order to assess the potential for an unraveling failure of flow-through rockfill dams, a systematic study of the hydraulic design of these structures was conducted and the non-linear nature of flow through these structures was dealt with using a p-LaPlacian-like partial differential equation. Subsequently, factors of safety against this type of failure are presented for a range of downstream slopes, thus showing the unsafe combinations of embankment slope and particle diameter. Three different index gradients within the toe of such structures were investigated. In this regard, the gradient most suitable for independently computing the height of the point of first flow emergence on the downstream face is examined and a method for independently computing the variation in hydraulic head within that vertical (which allows for the toe of the structure to be isolated) is presented. An additional gradient that allows for the independent estimation of the default tailwater depth is proposed. In order to provide better tools to assess the behavior of these embankments at the toe, laboratory and analytical studies were undertaken. In this regard, the hydraulics associated with the zone of the downstream toe were studied. The depth variation of the seepage-face was computationally modeled, and two approaches for solving the spatially varied flow (SVF) condition problem within the toe region undertaken. The results show that a dual linear variation in depth can be used to good accuracy, without inducing any unrealistic exit gradients in the zone of primary concern with respect to unraveling. It is hoped that these techniques and computational tools provided herein will aid in facilitating the design and assessment of these flow-through rockfill structures.