Browsing Lake, Craig by Title

Now showing items 15-27 of 27

  • Fate and transport of particle matter during geotube dewatering of a dioxin and furan (PCDD/F) contaminated sediment. 

    Alimohammadi, M. and Lake, C.B. 2022. Fate and transport of particle matter during geotube dewatering of a dioxin and furan (PCDD/F) contaminated sediment. Geotextiles and Geomembranes, Vol. 50(2):203-215. doi.org/10.1016/j.geotexmem.2021.09.006
    Geotextile tube dewatering is a pre-treatment method utilized in the remediation of high-water content materials (i.e. sediments and slurries). However, given the association some contaminants (e.g. dioxins and furans, ...

  • Geotextile biofiltration of primary treated municipal wastewater under simulated artic summer conditions. 

    Published version: Bridson-Pateman, E., Jamieson, R., and Lake, C.B. 2016. Geotextile biofiltration of primary treated municipal wastewater under simulated artic summer conditions. Geotextiles and Geomembranes, Vol 44(6):824-831. doi:10.1016/j.geotexmem.2016.06.012
    Wastewater stabilization ponds (WSPs) are common for wastewater treatment in remote Canadian Arctic communities. In this paper, two geotextiles of different mass/unit areas are examined as a potential biofiltration upgrade ...

  • Historical characterization and spatial distribution of organic contaminated sediment derived from kraft pulp mill effluent. 

    Hoffman, E. Alimohammadi, M., Lyons, J., Davis, E., Walker, T.R., and Lake, C.B. 2019. Historical characterization and spatial distribution of organic contaminated sediment derived from kraft pulp mill effluent. Environmental Monitoring and Assessment, 191:590. https://doi.org/10.1007/s10661-019-7763-y.
    Organic sediment contaminants [polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans (PCDD/Fs), and polycyclic aromatic hydrocarbons (PAHs)] were assessed using secondary monitoring data from a former tidal ...

  • Hydraulic and strength performance of three cement-stabilized soils subjected to cycles of freezing and thawing 

    Jamshidi, R. and Lake, C.B. 2015. Hydraulic and strength performance of three cement-stabilized soils subjected to cycles of freezing and thawing, Canadian Geotechnical Journal, 52(3): 283-294, 10.1139/cgj-2014-0100.
    A total of 108 specimens were prepared to examine the hydraulic performance and strength performance of nine different cement-stabilized soils under unexposed and freeze–thaw exposed conditions. Specimens from each mix ...

  • Lateral sand filters are effective for removal of antibiotic resistance genes from domestic wastewater 

    Hayward, J.L, Huang, Y., Yost, C.K., Truelstrup-Hansen, L., Lake, C.B., Tong, A., Jamieson, R.C. 2019. Lateral Flow Sand Filters are Effective for Removal of Antibiotic Resistance Genes from Domestic Wastewater. Water Research, 162, 482-491.
    The ability of lateral flow sand filters, used as on-site wastewater treatment systems (OWTS), to remove antibiotic resistance genes (ARGs), antibiotic resistant bacteria (ARB), and other relevant genetic markers (HF183, ...

  • Low impact development effects on aquifer recharge using coupled surface and groundwater models 

    Mooers, E.W., Jamieson, R.C., Hayward, J., Drage, J., Lake, C.B. 2018. Low impact development effects on aquifer recharge using coupled surface and groundwater models. ASCE Journal of Hydrologic Engineering, 23(9): 04018040.
    Low impact development (LID) is promoted as a sustainable management practice for stormwater in urbanized catchments. While the positive effects of LID features on surface water hydrology and water quality have been ...

  • Manufactured aggregate from cement kiln dust 

    Published version: Lake, C.B., Choi, H., Hills, C.D., Gunning, P. and Manaqibwala, I. 2016. Manufactured Aggregate from Cement Kiln Dust, Environmental Geotechnics. Published Online: December 12, 2016 doi:10.1680/jenge.15.00074
    This paper presents the results of a laboratory study that evaluated the geotechnical and geoenvironmental properties of a manufactured aggregate derived from cement kiln dust (CKD). The aggregate manufacturing process ...

  • Particle size effects on breakage of ACT aggregates under physical and environmental loadings 

    Choi. H., Lake, C.B. and Hills, C.D. 2020. Particle size effects on breakage of ACT aggregates under physical and environmental loadings. ASCE Journal of Hazardous, Toxic, and Radioactive Waste, 24(1): 04019029. DOI: 10.1061/%28ASCE%29HZ.2153-5515.0000468.
    Aggregates manufactured from fine-grained thermal waste residues using accelerated carbonation technology (ACT) represent a potential sustainable alternative to natural aggregates. However, for these manufactured products ...

  • Particle Size Effects on Breakage of ACT Aggregates Under Physical and Environmental Loadings 

    Choi. H., Lake, C.B. and Hills, C.D. 2020. Examining particle breakage for a manufactured aggregate from cement kiln dust. ASCE Journal of Hazardous, Toxic, and Radioactive Waste, 24(1): 04019029. DOI: 10.1061/%28ASCE%29HZ.2153-5515.0000468.
    Aggregates manufactured from fine-grained thermal waste residues using accelerated carbonation technology (ACT) represent a potential sustainable alternative to natural aggregates. However, for these manufactured products ...

  • Quantifying hydraulic conductivity spatial variability for a cement-based solidification/stabilization (S/S) remediation project: a case study. 

    9. Fenton, G.A., Lake, C.B., Liza, R. K. 2021. Quantifying hydraulic conductivity spatial variability for a cement-based solidification/stabilization (S/S) remediation project: a case study. Submitted to Canadian Geotechnical Journal, Vol. 58: 155-164. dx.doi.org/10.1139/cgj-2020-0067.
    This paper presents statistical analyses of hydraulic conductivity data collected from an existing cement-based solidification/stabilization (S/S) system. The goal is to characterize the spatial variability of hydraulic ...

  • Spatiotemporal assessment (quarter century) of pulp mill metal(loid) contaminated sediment to inform remediation decisions 

    Hoffman, E., Lyons, J., Boxall, J., Robertson, C. , Lake, C.B., and Walker, T.R. 2017. Spatio-temporal assessment (quarter century) of pulp mill metal(loid) contaminated sediment to inform remediation decisions, Journal of Environmental Monitoring and Assessment, 189: 257. https://doi.org/10.1007/s10661-017-5952-0.
    A bleached kraft pulp mill in Nova Scotia has discharged effluent wastewater into Boat Harbour, a former tidal estuary within Pictou Landing First Nation since 1967. Fifty years of effluent discharge into Boat Harbour has ...

  • Statistical Sample Size for Quality Control Programs of Cement-Based Solidification/Stabilization 

    Fenton, G.A, Liza, R., Lake, C.B., Menzies, T., Griffiths, D.V. 2015. Statistical sample size for quality control programs of cement-based solidification/stabilization, Canadian Geotechnical Journal, 52(10): 1620–1628, http://www.nrcresearchpress.com/doi/pdf/10.1139/cgj-2013-0478.
    Sampling requirements for the quality control (QC) of cement-based solidification/stabilization (S/S) construction cells do not currently specify the sample size considering the accuracy of the estimated effective hydraulic ...

  • Using a geotextile with flocculated filter backwash water and its impact on aluminium concentrations 

    Jahan, I. Wood, M., Lake, C.B. and Gagnon, G.A. 2018. Using a geotextile with flocculated filter backwash water and its impact on aluminium concentrations. Geotextiles and Geomembranes, 46(6):759-769.
    The use of geotextiles (i.e. geotextile tubes) in wastewater treatment applications is ever increasing. This paper examines the potential of using a geotextile to improve upon the treatment of aluminium present in a filter ...