Show simple item record

dc.contributor.authorSheng, JYen_US
dc.contributor.authorThompson, KRen_US
dc.date.accessioned2013-06-19T18:06:26Z
dc.date.available2013-06-19T18:06:26Z
dc.date.issued1996-11en_US
dc.identifier.citationSheng, JY, and KR Thompson. 1996. "A robust method for diagnosing regional shelf circulation from scattered density profiles." Journal of Geophysical Research-Oceans 101(C11): 25647-25659. DOI:10.1029/96JC01331en_US
dc.identifier.issn0148-0227en_US
dc.identifier.urihttp://dx.doi.org/10.1029/96JC01331en_US
dc.identifier.urihttp://hdl.handle.net/10222/27516
dc.description.abstractWe present a straightforward method for estimating surface circulation on an f plane from a set of irregularly spaced vertical density profiles. The first step is to express bottom density rho(h) as the sum of a mean for a given water depth h and an anomaly, = rho(h) - . Sea level eta can then be decomposed into a dynamic height ij relative to a deep reference level and a correction term, eta' = eta - (n) over tilde. The dynamic height is estimated using a generalization of the method of Helland-Hansen [1934] for diagnosing flow through a cross-shelf section under the assumption of zero bottom geostrophic flow. The correction eta' satisfies a two-dimensional elliptic partial differential equation forced by the bottom density anomaly, wind stress and the open boundary conditions, Before calculating the density-driven component of eta' we first test if the rho(h)' are statistically different from uncorrelated noise. If they are not, the correction associated with the bottom density anomaly is set to zero. Thus the method has a degree of robustness to errors in the density observations. If the rho(h)' have well-defined spatial structure the elliptic equation is solved for eta' and sea level is equated to + eta'. Note that even if this last step is required the only gridding of the density data is two-dimensional. This makes the proposed method simpler to use than many of the existing diagnostic models which require a three-dimensional gridding of the observed density profiles, To test the method, we use it to diagnose the flow from an idealized density field overlying an isolated topographic feature. The predicted sea level and flow fields are then compared, and shown to be in good agreement, with results from the Princeton Ocean Model, The method is then used to diagnose the winter surface circulation on the Scotian Shelf from observed density profiles, The reliability of the diagnosed flow pattern is assessed by comparing it against all available near-surface current measurements. The differences between the observed and diagnosed currents are used to estimate the remotely forced circulation on the Scotian Shelf. It is shown that the main features of the circulation can be explained by gradients in the density field, Remote forcing is important near the coast and the shelf break, The effect of local wind is relatively weak.en_US
dc.relation.ispartofJournal of Geophysical Research-Oceansen_US
dc.titleA robust method for diagnosing regional shelf circulation from scattered density profilesen_US
dc.typearticleen_US
dc.identifier.volume101en_US
dc.identifier.issue11en_US
dc.identifier.startpage25647en_US
dc.rights.holderThis paper was published by AGU. Copyright 1996 American Geophysical Union
 Find Full text

Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record