Browsing Faculty of Engineering by Title
Now showing items 134-153 of 207
-
Parametric study of the flexural behaviour of sandwich panels with flax FRP faces and foam cores using finite element analysis
(APFIS 2019, 2019-12-10)To meet the growing demands for increased sustainability in infrastructure, it is important to consider the use of more environmentally-friendly materials, such as plant-based fibre-reinforced polymers (FRPs). Plant-based ... -
Partial-Composite Behavior of Sandwich Beams Composed of Fiberglass Facesheets and Woven Fabric Core
(Elsevier, 2018-10-01)In this study, thin-walled sandwich composites made of glass fiber-reinforced polymer (GFRP) facesheets and a three-dimensional (3D) woven fabric core were studied. A total of 30 small-scale sandwich beam specimens were ... -
Particle size effects on breakage of ACT aggregates under physical and environmental loadings
(ASCE, 2020)Aggregates manufactured from fine-grained thermal waste residues using accelerated carbonation technology (ACT) represent a potential sustainable alternative to natural aggregates. However, for these manufactured products ... -
Particle Size Effects on Breakage of ACT Aggregates Under Physical and Environmental Loadings
(American Society of Civil Engineers, 2020)Aggregates manufactured from fine-grained thermal waste residues using accelerated carbonation technology (ACT) represent a potential sustainable alternative to natural aggregates. However, for these manufactured products ... -
Performance of High-Modulus Near-Surface-Mounted FRP Laminates for Strengthening of Concrete Columns
(Elsevier, 2019-05-01)This study investigates the performance of high-modulus near-surface-mounted (NSM) fiber-reinforced polymer (FRP) laminates in strengthening of existing concrete columns. The focus of this study is on the compressive and ... -
Photoneutron cross sections for unstable neutron-rich oxygen isotopes
(American Institute of Physics Inc, 2001)The evolution of giant dipole strength with neutron excess for the neutron-rich oxygen isotopes from A=17 to A=22 was measured systematically. It was found through all neutron-rich oxygen isotopes investigated that the ... -
Physical and Mechanical Properties of Flax Lime Concrete
(Canadian Society for Civil Engineering, 2018-06-13) -
-
-
Post-impact residual strength and resilience of sandwich panels with natural fiber composite faces
(Elsevier, 2011-06-01)In this paper, the post-impact residual flexural behavior of sandwich panels with flax fiber-reinforced polymer (FFRP) faces and polyisocyanurate (PIR) foam cores is investigated experimentally. The faces were manufactured ... -
Quantifying hydraulic conductivity spatial variability for a cement-based solidification/stabilization (S/S) remediation project: a case study.
(Canadian Science Publishing, 2021)This paper presents statistical analyses of hydraulic conductivity data collected from an existing cement-based solidification/stabilization (S/S) system. The goal is to characterize the spatial variability of hydraulic ... -
Recycled Ground Oyster Shell for Use as Filler in Self-Consolidated Grout
(Canadian Society for Civil Engineering, 2018-06-13) -
Recycled gypsum powder from waste drywalls combined with fly ash for partial cement replacement in concrete
(Elsevier, 2020-07-18)Recent developments towards sustainable infrastructure have motivated more environmentally conscious construction practices. The concrete industry is known to have a large carbon footprint, which can be decreased by reducing ... -
Rehabilitation of Bridge Colmuns using Hybrid Strengthening Method of Longitudinal CFRP and Transverse GFRP
(Canadian Society for Civil Engineering, 2018-07-31) -
Reliability Analysis of Modeling Concrete-Filled FRP Tubes under Flexural Loading for Bridge Applications
(Canadian Society for Civil Engineering, 2018-07-31) -
Reliability Assessment of Concrete-Filled RHS Beam-Column Design Provisions (Preprint)
(Springer, 2023-08-01)Revisions were recently proposed to the way in which concrete-filled hollow structural section members are handled in CSA S16. These revisions were based on previous research, comparisons to experiments, and an approximate ... -
Reliability-Based Evaluation of the Stiffness Reduction Factor for Slender GFRP Reinforced Concrete Columns
(Canadian Society for Civil Engineering, 2021-05-26)The stiffness of concrete columns is adjusted by a factor referred to as the stiffness reduction factor or the stability resistance factor when utilizing the simplified second-order moment magnification method for designing ...